Skip to content
EES

📍 Dhahran, Eastern Province

Rigger Level 1 Training & Certification in Dhahran

A Rigger Level 1 course for slingers, banksmen and new riggers on Saudi industrial and project sites. It teaches how to choose slings and rigging hardware, rig loads with the right hitches, give standard hand signals and inspect lifting gear before use. Level definitions vary by client scheme, so we align the content and assessment to your project's requirement. Headquarters of Saudi Aramco, with a high concentration of contractors operating under Aramco General Instructions.

Rigger Level 1 Training in Dhahran: local context

Contractor crews in Dhahran often work across Aramco Dhahran, KFUPM projects and Techno Valley sites, so each operator's competency evidence has to travel with them. EES delivers operator and rigger training in English or Arabic at your premises, with theory, practical assessment and competency cards for forklift, crane and slinging roles.

What we deliver in Dhahran

  • ✓Basic lifting terms: working load limit, mass of the load, centre of gravity and how sling angle increases the force in each leg
  • ✓Sling types and selection: wire rope, chain, synthetic web and round slings, matched to the load, the environment and the hitch
  • ✓Hitches: straight, choker and basket hitches and multi-leg slings, and how each changes rated capacity
  • ✓Rigging hardware: shackles, eyebolts, hooks, hoist rings and turnbuckles, used as marked and with correct pin and thread engagement
  • ✓Pre-use inspection of slings and hardware for damage, kinks, heat, wear and missing tags, with criteria for withdrawal from service
  • ✓Signalling and communication: standard crane hand signals, radio calls and the banksman role
  • ✓Safe slinging practice with tag lines, safe positions, no-go zones, landing and securing loads, then a written test and a practical rigging assessment

Standards

  • ✓ASME B30.9 (slings)
  • ✓ASME B30.26 (rigging hardware)
  • ✓ASME B30 series standard hand signals
  • ✓OSHA 29 CFR 1926 Subpart CC (rigger and signal person requirements)

Documentation

  • ✓Course certificate with a unique number that can be checked through our certificate verification page
  • ✓Competency card stating the rigger level and the scheme the course was aligned to
  • ✓Written test and practical rigging assessment records
  • ✓Attendance register and trainer assessment sheet showing the slings, hitches and signals assessed

Read the full Rigger Level 1 Training service overview →

FAQs

Do you provide Rigger Level 1 Training in Dhahran?+

Yes. EES provides Rigger Level 1 Training at client sites in Dhahran, including Aramco Dhahran, KFUPM and Techno Valley. Contact us with your requirement and we will confirm scope and scheduling.

Which standards and documents apply to Rigger Level 1 Training in Dhahran?+

Work in Dhahran is aligned with the following standards and references: ASME B30.9 (slings); ASME B30.26 (rigging hardware); ASME B30 series standard hand signals; OSHA 29 CFR 1926 Subpart CC (rigger and signal person requirements). On completion you receive: Course certificate with a unique number that can be checked through our certificate verification page; Competency card stating the rigger level and the scheme the course was aligned to; Written test and practical rigging assessment records.

What is Rigger Level 1, and how does it differ from Level 2 and Level 3?+

Definitions vary by client scheme. Commonly Level 1 is the basic rigger or slinger, Level 2 is an advanced rigger who plans rigging and lifts, and Level 3 is a rigging or lifting supervisor. We align the course to the level your project specifies.

Will my client accept a Rigger Level 1 certificate in Saudi Arabia?+

Acceptance depends on the client and the project scheme, and some clients require training that meets TVTC or client-specific requirements. Send us the requirement and ask for the current approval status and reference of the course before you book.

Book Rigger Level 1 Training in Dhahran